A weak or uneven flame on your stovetop burner can be more than just frustrating—it can slow down your cooking, waste gas, and lead to inconsistent results in your meals. If you’ve noticed that your burner flame is low, yellow, or uneven, the problem might be a clogged burner. The good news? You don’t need fancy tools or chemicals to fix it. With this simple homemade trick, you can unclog your burners and restore strong, blue flames—fast.

Why Do Burners Get Clogged?
Over time, food spills, grease splatters, and dust can block the tiny holes (called ports) in your stovetop burners. These clogs restrict gas flow and affect how the flame burns. Regular cleaning helps, but sometimes, you need a deeper cleanse to restore optimal performance.

What You’ll Need:
This homemade trick requires just a few household items:

White vinegar (a natural degreaser and disinfectant)
Baking soda (for breaking down grime)
A toothbrush or soft-bristle brush
A sewing needle or safety pin (for clearing out tiny burner holes)
Warm water
Dish soap
A small bowl
Step-by-Step: Unclog and Revive Your Burners
Step 1: Turn Off the Gas and Let the Stove Cool
Safety first. Make sure all knobs are off and the stovetop is completely cool before starting.

Step 2: Remove Burner Grates and Caps
Lift off the grates and burner caps. Set them aside. You’ll be cleaning both the burners and these removable parts.

Step 3: Make a Cleaning Paste
In a small bowl, mix 2 tablespoons of baking soda with just enough white vinegar to form a thick paste. It will fizz—this is normal and part of the cleaning magic.

Step 4: Apply the Paste
Coat the burner heads and caps with the paste. Let it sit for 15–20 minutes. This helps break down the stubborn grease and grime that may be clogging the ports.

Step 5: Scrub Gently
Use a toothbrush or soft brush to scrub the paste into the burner heads and caps. Focus on the tiny holes where the gas flows through. If you notice debris or blackened gunk in the holes, use a needle or pin to gently clear them out—one at a time. Be careful not to widen or damage the ports.

Step 6: Soak in Warm Soapy Water
After scrubbing, soak the burner parts in warm water mixed with a few drops of dish soap for 15–30 minutes. This loosens any remaining grime.

Step 7: Rinse and Dry Thoroughly
Rinse all parts with clean water and dry completely with a towel. Moisture can prevent proper ignition or even damage the burner over time.

Step 8: Wipe the Stove Surface
While the parts are soaking, wipe down the stovetop surface with vinegar and a cloth to remove grease and buildup.

Step 9: Reassemble and Test
Once everything is dry, reassemble the burners and grates. Turn on the gas and ignite each burner. You should now see a steady, blue flame—a sign of healthy gas flow and efficiency.

Extra Tip: Keep It Clean with Monthly Maintenance
To avoid future clogs and weak flames, make it a habit to:

Wipe burners after heavy cooking sessions
Soak burner caps in vinegar once a month
Check for food spills or blockages weekly
Why This Trick Works
The combination of baking soda and vinegar is a powerhouse for breaking down grease and grime. Vinegar cuts through oily buildup, while baking soda acts as a gentle abrasive to lift and loosen debris. By targeting both surface dirt and deep-seated clogs, this method restores gas flow naturally—without harsh chemicals.

When to Call a Professional
If you’ve tried this homemade trick and the flame is still weak or yellow, the issue might be with your gas line, regulator, or ignition system. In such cases, consult a licensed technician for a professional inspection.

A weak flame doesn’t mean it’s time to replace your stove. Often, it’s just a matter of clearing out the gunk. With this simple DIY trick using ingredients you probably already have at home, you can clean your stovetop burners, improve gas flow, and enjoy efficient cooking again. Try it today—you’ll be surprised how much stronger and cleaner your flame becomes!